USB Device Server over 10/100/1000 Mbps Ethernet Network TCP/IP

$85.55

Serve up your USB network devices through the NetUSB-100iX4 Ethernet connection. This USB device server has many features, is light weight, and can be wall mounted or on other flat surfaces for 10/100/1000 Mbps Ethernet support.

Out of stock

Part Number: NetUSB-100iX4

Description

Run network enabled devices through USB Device Server

The NetUSB-100iX4 is a network-enabled USB Server for connecting USB devices over the 10/100/1000 Mbps Ethernet network running TCP/IP. By adding this USB to Ethernet Server to LAN, you can network-enable the USB device. It breaks the traditional five-meter USB cabling distance limitation. By this implementation, USB devices connected to NetUSB-100iX4 can be made available to remote clients over LAN- without a locally attached host PC.

The NetUSB-100iX4 provides a simple and convenient way to extend a USB device over long distances and allows for sharing that USB device with multiple users over Ethernet Network.

NetUSB-100iX4 Device Server Features

  • Extends USB cabling distance beyond five meters
  • Allows USB devices to be used and shared by client PCs over LAN
  • Supports wide variety of USB devices
  • Compatible with USB 2.0 specification and backward compatible with USB 1.1
  • Connects up to 4 devices using an additional USB Hub (not included)
  • Provides Plug-n-Play and hot-swap functions same as on board USB port
  • Access and monitor USB devices over a user-friendly application interface
  • Supports wide input power range: DC9V~DC48V

NetUSB-100iX4 Specifications

    The NetUSB-100iX4 USB to Ethernet Server provides:

  • RJ45 Ethernet to 1 USB 2.0 port
  • Allows USB Devices to be used and shared by client PC’s over LAN
  • USB 2.0 High Speed Ports up to 480 Mbps speed
  • Full 500 mA power provided to USB port
  • Connects up to 4 devices using an additional USB Hub (not included)
  • Supports wide variety of USB devices
  • 10/100/1000 Mbps Ethernet support
  • Supports IP addressing: Static and DHCP
  • LEDs for system/ Ethernet status
  • Field-upgradeable firmware
  • Supports “Reset” button for system reset
  • Supports “Default” button for configuration to default setting
  • Input power range: DC9V~DC48V
  • Compatible Windows XP/ 2003 Server/ Vista/ Windows 7/ Windows 8
  • Regulatory approvals: FCC Class B (DoC) and CE
  • RoHS compliant

Hardware Restore Factory Default Button located inside the housing:
The NetUSB-100iX4 USB server supports a Hardware Factory Default button to restore the default settings (like IP Address). You will need to open up the case. When the NetUSB-100iTX is powered on, press the factory default push button for 5 seconds. It will restore the default settings for the NetUSB-100iX4 USB Server.

NetUSB-100iX4 Factory Reset Button to restore server defaults

Hardware Reset Button
The NetUSB-100iX4 USB server supports Hardware Reset Button to reset the hardware. When the Hardware Reset Button is pressed for a short duration, it will reset the NetUSB-100iX4 USB server system.

Hardware Reset Button resets the server system

Additional information

Weight 0.869 lbs